Muller's method

Muller's method is a root-finding algorithm, a numerical method for solving equations of the form f(x) = 0. It was first presented by David E. Muller in 1956.

Muller's method proceeds according to a third-order recurrence relation similar to the second-order recurrence relation of the secant method. Whereas the secant method proceeds by constructing a line through two points on the graph of f corresponding to the last two iterative approximations and then uses the line's root as the next approximation at every iteration, by contrast, Muller's method uses three points corresponding to the last three iterative approximations, constructs a parabola through these three points, and then uses a root of the parabola as the next approximation at every iteration.

Recurrence relation

Muller's method is a recursive method that generates a new approximation of a root ξ of f at each iteration using the three prior iterations. Starting with three initial values x₀, x₋₁ and x₋₂, the first iteration calculates an approximation x₁ using those three, the second iteration calculates an approximation x₂ using x₁, x₀ and x₋₁, the third iteration calculates an approximation x₃ using x₂, x₁ and x₀, and so on: the k^th iteration generates approximation x_k using x_k-1, x_k-2, and x_k-3. Each iteration takes as input the last three generated approximations and the value of f at these approximations: the values x_k-1, x_k-2 and x_k-3 and the function values f(x_k-1), f(x_k-2) and f(x_k-3). The approximation x_k is calculated as follows from those six values.

First, a parabola y_k(x) is constructed by interpolating through the three points (x_k-1, f(x_k-1)), (x_k-2, f(x_k-2)) and (x_k-3, f(x_k-3)) using a Newton polynomial. y_k(x) is

y_{k}(x)=f(x_{k-1})+(x-x_{k-1})f[x_{k-1},x_{k-2}]+(x-x_{k-1})(x-x_{k-2})f[x_{k-1},x_{k-2},x_{k-3}],\,

where f[x_k-1, x_k-2] and f[x_k-1, x_k-2, x_k-3] denote divided differences. This can be rewritten as

y_{k}(x)=f(x_{k-1})+w(x-x_{k-1})+f[x_{k-1},x_{k-2},x_{k-3}]\,(x-x_{k-1})^{2}\,

where

w=f[x_{k-1},x_{k-2}]+f[x_{k-1},x_{k-3}]-f[x_{k-2},x_{k-3}].\,

The iterate x_k is then given as the solution of the quadratic equation y_k(x) = 0 closest to x_k-1. Altogether, this implies the overall nonlinear third-order recurrence relation^[1]

x_{k}=x_{k-1}-{\frac {2f(x_{k-1})}{w\pm {\sqrt {w^{2}-4f(x_{k-1})f[x_{k-1},x_{k-2},x_{k-3}]}}}},

where the sign of the square root should be chosen such that the total denominator is as large as possible in magnitude.

Note that x_k can be complex even when the previous iterates are all real. This is in contrast with other root-finding algorithms like the secant method, Sidi's generalized secant method or Newton's method, whose iterates will remain real if one starts with real numbers. Having complex iterates can be an advantage (if one is looking for complex roots) or a disadvantage (if it is known that all roots are real), depending on the problem.

Speed of convergence

For well-behaved functions, the order of convergence of Muller's method is approximately 1.839 and exactly the tribonacci constant. This can be compared with approximately 1.618, exactly the golden ratio, for the secant method and with exactly 2 for Newton's method. So, the secant method makes less progress per iteration than Muller's method and Newton's method makes more progress.

More precisely, if ξ denotes a single root of f (so f(ξ) = 0 and f'(ξ) ≠ 0), f is three times continuously differentiable, and the initial guesses x₀, x₁, and x₂ are taken sufficiently close to ξ, then the iterates satisfy

\lim _{k\to \infty }{\frac {|x_{k}-\xi |}{|x_{k-1}-\xi |^{\mu }}}=\left|{\frac {f'''(\xi )}{6f'(\xi )}}\right|^{(\mu -1)/2},

where μ ≈ 1.84 is the positive solution of $x^{3}-x^{2}-x-1=0$ , the defining equation for the tribonacci constant.

Generalizations and related methods

Muller's method fits a parabola, i.e. a second-order polynomial, to the last three obtained points f(x_k-1), f(x_k-2) and f(x_k-3) in each iteration. One can generalize this and fit a polynomial p_k,m(x) of degree m to the last m+1 points in the k^th iteration. Our parabola y_k is written as p_k,2 in this notation. The degree m must be 1 or larger. The next approximation x_k is now one of the roots of the p_k,m, i.e. one of the solutions of p_k,m(x)=0. Taking m=1 we obtain the secant method whereas m=2 gives Muller's method.

Muller calculated that the sequence {x_k} generated this way converges to the root ξ with an order μ_m where μ_m is the positive solution of $x^{m+1}-x^{m}-x^{m-1}-\dots -x-1=0$ .

The method is much more difficult though for m>2 than it is for m=1 or m=2 because it is much harder to determine the roots of a polynomial of degree 3 or higher. Another problem is that there seems no prescription of which of the roots of p_k,m to pick as the next approximation x_k for m>2.

These difficulties are overcome by Sidi's generalized secant method which also employs the polynomial p_k,m. Instead of trying to solve p_k,m(x)=0, the next approximation x_k is calculated with the aid of the derivative of p_k,m at x_k-1 in this method.

Computational example

Below, Muller's method is implemented in the Python programming language. It is then applied to find a root of the function $f (x) = x 2 - 612$ .

from typing import *
from cmath import sqrt  # Use the complex sqrt as we may generate complex numbers

Num = Union[float, complex]
Func = Callable[[Num], Num]

def div_diff(f: Func, xs: list[Num]):
    """Calculate the divided difference f[x0, x1, ...]."""
    if len(xs) == 2:
        a, b = xs
        return (f(a) - f(b)) / (a - b)
    else:
        return (div_diff(f, xs[1:]) - div_diff(f, xs[0:-1])) / (xs[-1] - xs[0])

def mullers_method(f: Func, xs: (Num, Num, Num), iterations: int) -> float:
    """Return the root calculated using Muller's method."""
    x0, x1, x2 = xs
    for _ in range(iterations):
        w = div_diff(f, (x2, x1)) + div_diff(f, (x2, x0)) - div_diff(f, (x2, x1))
        s_delta = sqrt(w ** 2 - 4 * f(x2) * div_diff(f, (x2, x1, x0)))
        denoms = [w + s_delta, w - s_delta]
        # Take the higher-magnitude denominator
        x3 = x2 - 2 * f(x2) / max(denoms, key=abs)
        # Advance
        x0, x1, x2 = x1, x2, x3
    return x3

def f_example(x: Num) -> Num:
    """The example function. With a more expensive function, memoization of the last 4 points called may be useful."""
    return x ** 2 - 612

root = mullers_method(f_example, (10, 20, 30), 5)
print("Root: {}".format(root))  # Root: (24.738633317099097+0j)

References

^ Muller, David E. (1956). "A method for solving algebraic equations using an automatic computer". Mathematical Tables and Other Aids to Computation. 10 (56): 208–215. doi:10.1090/S0025-5718-1956-0083822-0. JSTOR 2001916. MR 0083822.

Atkinson, Kendall E. (1989). An Introduction to Numerical Analysis, 2nd edition, Section 2.4. John Wiley & Sons, New York. ISBN 0-471-50023-2.
Burden, R. L. and Faires, J. D. Numerical Analysis, 4th edition, pages 77ff.
Press, WH; Teukolsky, SA; Vetterling, WT; Flannery, BP (2007). "Section 9.5.2. Muller's Method". Numerical Recipes: The Art of Scientific Computing (3rd ed.). New York: Cambridge University Press. ISBN 978-0-521-88068-8.

v t e Root-finding algorithms
Bracketing (no derivative)	Bisection method Regula falsi ITP method
Householder	Newton's method Halley's method
Quasi-Newton	Broyden's method Secant method Newton–Krylov method Steffensen's method
Hybrid methods	Brent's method Ridders' method
Polynomial methods	Aberth method Bairstow's method Durand–Kerner method Graeffe's method Jenkins–Traub algorithm Lehmer–Schur algorithm Laguerre's method Splitting circle method
Other methods	Fixed-point iteration Inverse quadratic interpolation Muller's method Sidi's generalized secant method